|
Organization of International Meetings
Filomena D. d’Almeida
IV Euromicro Workshop on Parallel and Distributed Processing Referee for the proceedings, Braga, January 1996.
2nd International Meeting on Vector and Parallel Processing VECPAR96 Member of the Scientific Committee, FEUP, September 1996
3rd International Meeting on Vector and Parallel Processing VECPAR98
M
Advanced School on Recent Developments in Large-Scale Scientific Computing" Responsible by organization of the Summer School, Faculty of Engineering, University of Porto, 3-6 July 2001. This summer school was sponsored by the Unit of Numerical Methods in Mechanic and Structural Engineering belongs to IDMEC.
ROCS Project (with financial support by the World Bank) Active participation Contract celebrated between Fundação Gomes Teixeira of the University of Porto and DNEP Direcção Nacional de Estradas e Pontes de Moçambique with colaboration of Faculty of Engineering of the Universty of Eduardo Modlane of Mozambique. From 1997 to 1999. Organization of local scientific conferences on Mechanical Engineering.
Structural Optimization” integrated in IRF – International Conference on Integrity, Reliability and Failure Member of the Organising Committee of the Symposium, Porto, July 1999
1º Congresso Luso - Moçambicano de Engenharia Member of the Scientific Committee, Maputo, Moçambique, 14 -16 September 1999
2º Congresso Luso-Moçambicano de Engenharia Member of the Organizing Committee, Member of the Scientific Committee and Editor of the meeting of the conference. University do Porto and University Eduardo Mondlane Maputo-Moçambique, 4-6 September 2001. This conference was sponsored by the Unit of Numerical Methods in Mechanic and Structural Engineering belongs to IDMEC.
III Congresso Luso-Moçambicano de Engenharia Member of the Organizing Committee, Member of the Scientific Committee and Editor of the meeting of the conference. University do Porto and University Eduardo Mondlane Maputo-Moçambique, 19-21 August 2003 This conference was sponsored by the Unit of Numerical Methods in Mechanic and Structural Engineering belongs to IDMEC.
“Congresso de Métodos Computacionais em Engenharia”, incorporating the “VIII Congresso Nacional de Mecânica Aplicada e Computacional and the VI Congresso de Métodos Numéricos en Ingeniería”, and Member of the Scientific Committee, LNEC, Lisboa, May to 2 July 2004
III European Conference on Computational Solid and Structural Mechanics – CSSM2006 Member of the Scientific commission, from 5 - 8 de June de 2006, LNEC, Lisboa, Portugal. Organized by Associação Portuguesa de Mecânica Teórica, Aplicada e Computacional
- Genetic Algorithms, Organization of a mini - symposium integrated in the III European Conference on Computational Solid and Structural Mechanics – CSSM2006, from 5 - 8 de June de 2006, LNEC, Lisboa, Portugal. Organized by Associação Portuguesa de Mecânica Teórica, Aplicada e Computacional
J. César de Sá
Second ESAFORM Conference on Material Forming Member of the Scientific Commission, ESAFORM - European Scientific Association for Material Forming, Guimarães, Portugal, 15-19 April 1999.
Reliability and efficiency of numerical tools in engineering analysis and practice Responsible by organization of the Symposium, included on IRF INTEGRITY-REALIBILITY-FAILURE An International Conference, University of Porto, Portugal, July 19-22, 1999.
VI Congresso Nacional de Mecânica Aplicada e Computacional Member of the Organized Comission, Universidade de Aveiro, April 2000
Numerical Tools in Engineering Design Responsible by organization of the Symposium, included in International Conference on Mechanics and Materials in Design, Orlando, Florida, USA, May 2000.
2nd International Coloquium on Modelling of Glass Forming and Tempering Member of the Scientific Commission, 23-25 January 2002, Vallencienes, France
Conformado de Metales Responsible by organization of the Thematic Session, included in V International Conference on Métodos Numéricos en Ingeniería, 3-6 Junho 2002, Madrid, Spain
VIII Congresso Nacional de Mecânica Aplicada e Computacional Member of the Scientific Comittee and and organization of a tematic sessassio on Computational Strategies for Forming Processes in the COMPLAS 2003- 7th International Conference on Computational Plasticity, Barcelona, 7-10 Abril 2003
Computational Strategies for Forming Processes Organizanization of a thematic Sessation in the COMPLAS 2003- 7th International Conference on Computational Plasticity, Barcelona, 7-10 Abril 2003.
VII Congresso Nacional de Mecânica Aplicada e Computacional Member of the Scientific Committee, 14- Abril 2003, Évora
“Congresso de Métodos Computacionais em Engenharia”, incorporating the “VIII Congresso Nacional de Mecânica Aplicada e Computacional and the VI Congresso de Métodos Numéricos en Ingeniería” Member of the Scientific Committee, LNEC, Lisboa, May to 2 July 2004
Conformação Plástica Organization of a thematic sessation in "Congresso de Métodos Computacionais em Engenharia" incorporando o "VIII Congresso Nacional de Mecânica Aplicada e Computacional" e o "VI Congressso de Métodos Numéricos en Ingeniería", 31 de Maio de 2004 a 2 de Junho de 2004, LNEC, Lisboa
J. César de Sá and L. C. Sousa
Reliability and Efficiency of Numerical Tools in Engineering Analysis and Practice Members of the Organization Committee on the Symposium, integrated in IRF - International Conference on Integrity, Reliability and Failure, Porto, July 1999 Porto, July 1999.
P. M. M. Vila Real
Construção Metálica e Mista 2 Member of the Scientic Comission, CMM– Associação Portuguesa de Construção Metálica e Mista, November 1999.
VI Congresso de Mecânica Aplicada e Computacional Member of the Organizing Committee and Executive Committee, University of Aveiro,17-19, April 2000.
Internet Business and the Industry of Construction - Experiences and Challenges for Management, Architecture and Engineering Member of the International Programme Committee , Europarque, Santa Maria da Feira, Portugal, 15-16 November 2001.
Construção Metálica e Mista 3 Member of the Cientific, Executive and Organizing Committee, CMM– Associação Portuguesa de Construção Metálica e Mista, December 2001.
3rd European Conference on Steel Structures Member of the Organizing Committee of the EUROSTEEL, Portugal, 17-19 April 2002
V Congreso en Métodos Numéricos en Ingeniería Member of the Scientific Committee, Madrid, Spain on 3-6 June 2002
VII Congresso de Mecânica Aplicada e Computacional Member of the Scientific Committee, Universidade de Évora, 14-16 de Abril, 2003
III Congresso Luso Moçambicano de Engenharia Member of the Scientific Committee, University do Porto and University Eduardo Mondlane Maputo-Moçambique, 19-21 de Agosto de 2003 This conference was sponsored by the Unit of Numerical Methods in Mechanic and Structural Engineering belongs to IDMEC.
Structures in Fire 2004 – SiF’04 Member of the Scientific Committee of the Workshop, Ottawa, Canadá, de 10 a 11 de Maio de 2004
“Congresso de Métodos Computacionais em Engenharia”, incorporating the “VIII Congresso Nacional de Mecânica Aplicada e Computacional and the VI Congresso de Métodos Numéricos en Ingeniería” Member of the Scientific Committee, LNEC, Lisboa, May to 2 July 2004
Estruturas Metálicas e Mista, Sessão Convidada no Congresso de Métodos Computacionais em Engenharia, organizado pela Associação Portuguesa de Mecânica Teórica, Aplicada e Computacional e pela Sociedad Española de Métodos Numéricos en Ingeniería que se realizou no LNEC, Lisboa, de 31 de Maio a 2 de Junho de 2004.
ICCES’04 – International Conference on Computcional & Experimental Engineering and Sciences Member of the National Committee Organization, Madeira, Portugal, de 26-29 de Julho de 2004.
Simulação do Comportamento Sísmico de Estruturas de Betão. Comparação com ensaios Experimentais, Prof. Rui Faria, Secção Autónoma de Engenharia Civil da Universidade de Aveiro, 22 de Abril de 2005 Organização de uma palestra, que contou com a participação de um docente da Faculdade de Engenharia da Universidade do Porto.
VII Congresso de Métodos Numéricos en Ingeniería incorporando o IX Congresso Nacional de Mecânica Aplicada e Computacional, Member of the Organizer Comission and in the Scientific Comission. This Copnference were sponsored by the Associação Portuguesa de Mecânica Teórica, Aplicada and Computacional and by the Sociedad Española de Métodos Numéricos en Ingeniería, Granada, Spain, 4 - 7 July 2005,
Estruturas Metálicas e Mista Invited Sessation in the VII Congresso de Métodos Numéricos en Ingeniería incorporando o IX Congresso Nacional de Mecânica Aplicada e Computacional
IV Congresso Luso-Moçambicano de Engenharia Member of the Organizer Comission and in the Scientific Commission, Mozambique, 30th August until 1st September 2005
V Congresso de Construção Metálica e Mista Member of the Scientific Commission, Lisbon, November 24-25 2005
R. Martins
VII Congresso de Mecânica Aplicada e Computacional Member of the Scientific Committee, Universidade de Évora, 14-16 de Abril, 2003
Non-linear Dynamics of Structures and Mechanical Systems Organization of special session at the Seventh International Conference on Computational Structures Technology (CST2004) which occurred in Lisbon, 7-9 September 2004 and member of the “editorial board” of the conference
Non-Linear Vibration of Structures Mini-Symposium, III European Conference on Computational Mechanics: Solids, Structures and Coupled Problems in Engineering, Lisbon, Portugal, 5-8 June 2006, (Nineteen abstracts were submitted to this symposium, sixteen were accepted); Member of the conference scientific committee and Member of the conference scientific committee
Non-Linear Vibration of Structures, Mini-Symposium, III European Conference on Computational Mechanics: Solids, Structures and Coupled Problems in Engineering, Lisbon, Portugal, 5–8 June 2006
EUROMECH Colloquium 483, GEOMETRICALLY NON-LINEAR VIBRATIONS OF STRUCTURES Chairman, 5-7 September 2007, Faculty of Engineering, University of Porto, Porto, Portugal.
L. M. S. Dinis
VII Congresso de Mecânica Aplicada e Computacional Membro da Comissão Cientifica e Participação na Mesa como Moderador em uma das Sessões, 2003
III Congresso Luso Moçambicano da Engenharia Participação na Mesa como Moderador em uma das Sessões, 2003
“Congresso de Métodos Computacionais em Engenharia”, incorporating the “VIII Congresso Nacional de Mecânica Aplicada e Computacional and the VI Congresso de Métodos Numéricos en Ingeniería” Member of the Scientific Committee, LNEC, Lisboa, May to 2 July 2004
6º Congresso Nacional em Mecânica Experimental Organization of a Sessation of Métodos Numéricos e Participação and has been a moderator in one of the sessations, Ponta Delgada, Açores, 27 a 29 de July 2005
"Congresso de Métodos Computacionais em Engenharia”, incorporating the “VIII Congresso Nacional de Mecânica Aplicada e Computacional and the VI Congresso de Métodos Numéricos en Ingeniería” Organization of several parallel cessations during the conference, LNEC, Lisboa, May to 2 July 2004
V Portuguese Congress in Mixed and Metallic Construction Lisbon, 24-25 November 2005;
6th International Workshop on Structures In Fire (Sif 06), Aveiro, 11-12 May 2006.
5th International Conference in Mechanics and Materials in Design (M2D-5), FEUP-Porto, 24-26 July 2006;
International Congress for Fire Safety in Tall Buildings, University of Cantabria, Santander (Spain), 19 October 2006;
|
For further information
contact:
IDMEC - PÓLO FEUP - Rua
Dr. Roberto Frias, s/n * 4200-465 Porto - PORTUGAL last updated on segunda-feira Agosto 13, 2007 |